Skip to content

FREE SHIPPING OVER $150AUD

DEFENDER POP TOP CONVERSIONS

THE MOVA LOFT

Loiter in comfort. Explore in anonimity. Cook under an expanding sky of stars. Enjoy apres ski and retire to your penthouse on wheels. Our Mova Land Rover Defender pop top roof converisons have been rigouriously developed to be the lightest, strongest and easiest to use on the market, leaving less time for setup and more time to enjoying the view. Available in two versions. Either retain your factory roof (Loft LF) or upgrade to our premium Australian made roof (Loft Ex).

Both variations are mounted to our lightweight base frame with built in map shelf as well as three acess ports along each side which allow for easy access to run additional services such as power, water and air . With an intergreated gutter it retains the look of your originail Defender. There are a range of optional add ons; allowing you to tailor the build to your needs! Pair it with our internal fit-outs and you'll have have everything you need to enjoy life on the road.

BY MOVA - LOFT L.F

from $14,995 + fit

Roof and Frame

Retain your factory roof with a colour matched sub and mounting frame. The sub frame and roof mouting frames are constructed out of lightweight aluminium with multitple interntal ribs and gussets for extra strength and suppoort; add a roof-rack to create extra load space.

Bed and access

  • 75mm dual foam mattess
  • lightweight resin infused composite bed base.
  • Gas strut assisted raising to create an immensly usable internal living space.
  • Removable cotton mattress cover

Canvas and awnings

We've worked hard to make sure you don't have to; pull the roof down and the canvas will take care of it self - No spring poles, no hassle. Made from 380gsm Australian made canvas it will keep you high and dray. YKK zips on all windows and Midgee mesh.

Lifting, Loading and Locking

Want to kayak the Zambezi, need a range of boards to surf the longest right at Scorpion Bay - maybe you just need to carry extra gear and some firewood - our subframes are designed to reinforce the factory roof and allow additional load carrying via a rack system or add our internal frame to direct load. Twin gas struts make raising and lowering simple. Upgrade to our tri-lift or Neu lift systems to make it even easier!

Lights and Charging

As standard there are charing points on each side of the bed platform, as well as strip lights in the roof and bed base; you have the option to have these wired to the factory lights on/off switching or run to a deutsch connector so you can run it into an existing leisure battery system.  

Optional UPGRADES

  • Tri-lift system: The addition of a third strut means that the initial lift is take care of with minimal effort
  • Neu-lift: Replace the main gas-strut with our pnuematic lifting rams to automate the lifting and lowering.
  • Internal roof skeleton and direct load roof track
    • Upholstered aluminium inner skin to replace roof lining as well as an internal frame structure making the roof strong enough to walk on.
  • Venlite bed base
    • Infused LED lighting
    • Add timber sprung bed base
  • Self sprung side awnings
  • Two-pack automotive paint colour matched sub frames
    • Factory roof looking a little worse for wear? Ask about respray options.

LOFT L.F. Specs

  • Added Height: 130mm
  • Added Weight: 86kg
  • Open Height (Internal): 1,850mm
  • Materials: 304gsm Australian made canvas, YKK zips, marine grade stainless steel hinges,

BY MOVA - LOFT E.X

from $21,995 + fit

Roof and Frame

Australian designed and made, the Mova E.X roof is has been engineered and built with a huge amount of reinforcement allowing direct load abilities negating the needfor a roof rack; carry more, with a lower centre of gravity and no wasted payload or cost adding a roof rack. Built with light wieght aluminium and aeronautical fastners to exacting standards - built locally to explore globally.

Four lines of intergrate aeronautical grade carge track running along the roof save you weight and cost by allowing direct loading to the roof.

Our premium made roof is perfect for replacing the factory roof that may be hail damged, a little worse for wear - or maybe it's in amazing condition and you just want to sell it on; the MOVA LOFT E.X will take you to adventurours new heights.

Bed and access

  • 75mm dual foam mattess
  • lightweight breathable Ventlite base; nothing prepares you better for the next days adventures than a good nights sleep!
  • 1,250w x 2,000l x75h mattress and Ventlite base on gas-struts, raise the bed to create an immensly usable internal living space.
  • Removable infill panels allow you to create a completely enclosed platform.

Canvas and awnings

We've worked hard to make sure you don't have to; pull the roof down and the canvas will take care of it self - No spring poles, no hassle. Made from 380gsm Australian made canvas it will keep you high and dray. YKK zips on all windows and Midgee mesh.

Lifting, Loading and Locking

Made locally to explore globally - our Loft E.X roof has been designed and engineered to be light but also stronger than the factory (and any other conversion on the market); the roof is strong enoug to walk on and with two aeronautical grade tie down rails you can load directly to the roof.

Our Australian made roof has been made with a gutter to replicate the original factory model roof, so you can also unitlise a gutter mounted rack if you desire.

With out tri-lift gas strut system as standard in the E.X. model lifting and lowering is a breeze! Like the L.F. model all latching is internally housed with in the frame with 650kg of force; meaning no overcentres to break and no having to rely on a small padlock to keep would be theives out of your car.

Lights and Charging

Like the L.F. there standard there are charing points on each side of the bed platform, as well as strip lights in the roof as well as in the Ventlite Base; you have the option to have these wired to the factory lights on/off switching or run to a deutsch connector so you can run it into an existing leisure battery system.  

Optional UPGRADES

  • colour matched powdercoated Ventlite base
  • Timber sprung bed base
  • Neu Lift: Add out pnuematic lifting sytems to take the roof up and down with the push of a button.
  • Upgrade to 4 aeronautical grade load ralis on the roof; create additional tie down points as well as protect your roof.
  • Two-pack automotive paint colour matched roof and sub frames

LOFT E.X. Specs

OUR ROOF CONVERSIONS

Our pop top systems are the most versatile conversion on the market and are rigouriously engeneered by our team with over 30 year of design experience. We want you to spend less of your valuable time setting up camp and more of it sitting back and enjoying the adventure with friends and family.

Both of our Land Rover Defender roof conversions are rigouriously engineered and are ADR compliant. Made from lightweight aluminium; our advanced manufacturing techniques mean that we've been able to create a stonger product with more useable space; all while keeping weight down and adding extra strength.

YOUR DREAM TOURER, YOUR WAY

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Added to cart